Vortex Superior insulated flexible duct R2.0, 200mm x 6m (VS200)
This Vortex Superior duct, code VS200, combines a 200mm diameter with R2.0 insulation in a 6m length. It is made for ducted heating and cooling, where conditioned air travels through a roof space that can be much hotter or colder than the rooms below.
- Brand: Vortex
- Insulation: R2.0
- Diameter: 200mm
- Length: 6m
- Metalised inner core wrapped in polyester insulation, with a metalised outer fire jacket
- Operating temperature: -20°C to +80°C
- Operating pressure: -190Pa to +1200Pa
- Complies with AS 4254.1
- Code: VS200
- Range: Vortex Superior
The duct connects 200mm spigots on fittings such as takeoffs, Y branches, dampers and outlets. Hang it with strap at regular intervals so it runs in smooth curves, and keep it off hot surfaces and sharp edges in the ceiling. At each end, fix the core to the spigot first, then seal the insulation and fire jacket over the top.
Before ordering, confirm the 200mm size at every connection on the run and add up the total length needed in 6m lengths. Check the insulation R-value required for your climate zone and application before ordering.