Redzone motorised zone damper 250mm, 240V, 2.5Nm (MDM250M)
Redzone motorised zone damper for 250mm duct, code MDM250M, with a 240V 2.5Nm drive open, drive close motor.
- Brand: AAD
- Range: Redzone
- Size: 250mm
- Motor: 240V, 2.5Nm, drive open and drive close
- Galvanised barrel with 5mm silver insulation
- Folded metal blade with 12mm foam seal
- Metal shaft, brass motor brushes
- Code: MDM250M
The damper sits in the duct feeding a zone, and the zone controller opens or closes it to direct air where it is needed. At 250mm it is a mid sized damper for branch or zone ducts. Construction includes a galvanised barrel with 5mm silver insulation, a folded metal blade with a 12mm foam seal, and a motor with a metal shaft and brass brushes.
Check that your zone controller supports 240V drive open, drive close dampers. Because the motor runs on 240V, the electrical connection must be made by a licensed electrician. Confirm the duct is 250mm, and position the damper with enough clearance to reach and replace the motor later.