Paired copper coil 3/8" + 5/8" x 20m, insulated (PC3858)
Pre-insulated paired copper coil with 3/8" and 5/8" lines, 20m long, insulated with 9mm PE, for the refrigerant run between a split system indoor unit and outdoor unit.
- Brand: AAD
- Range: Aradon
- Lines: 3/8" and 5/8"
- Length: 20m
- Insulation: 9mm PE
- Insulation R-value: R.55/.49
- Annealed copper tube to AS 1571
- R410A rated
- Insulation colour: white
- Code: PC3858
With both lines paired and insulated in one coil, the installer can lay out the full run, cut once and connect both lines at each end. Use a bender on the 5/8" line for tight turns, cap the ends until they are connected, and finish the insulation neatly over joints and through the wall. Refrigerant pipework must be installed by an appropriately licensed technician.
Confirm the unit calls for 3/8" and 5/8" pipe sizes and check its maximum pipe length. Make sure the 20m coil covers your route, and compare the 9mm PE insulation and R-value with any job requirement. In Australia, connection and commissioning is work for an ARC-licensed technician.