Paired copper coil 3/8" + 5/8" x 10m, insulated (PC103858)
This pre-insulated paired copper coil has 3/8" and 5/8" lines in a 10m length, with 9mm PE insulation on each line. It connects split system indoor and outdoor units.
- Brand: AAD
- Range: Aradon
- Lines: 3/8" and 5/8"
- Length: 10m
- Insulation: 9mm PE
- Insulation R-value: R.55/.49
- Annealed copper tube to AS 1571
- R410A rated
- Insulation colour: white
- Code: PC103858
A 10m coil sits between short back-to-back installs and longer runs, which can reduce offcut on medium-length routes. Unroll it along the route, form bends carefully on the 5/8" line, and cut, flare or braze both ends to the unit connections. Seal the insulation at each joint and at wall penetrations. Refrigerant pipework must be installed by an appropriately licensed technician, which in Australia means an ARC-licensed technician.
Measure the full route and confirm that 10m covers it, and check that the unit installation manual specifies 3/8" and 5/8" pipe sizes. If a particular insulation type or thickness is required, compare it with the 9mm PE insulation listed.