Paired copper coil 1/4" + 5/8" x 5m, insulated (PC51458)
This 5m pre-insulated paired copper coil carries 1/4" and 5/8" lines in 9mm PE insulation, for short split system pipe runs.
- Brand: AAD
- Range: Aradon
- Lines: 1/4" and 5/8"
- Length: 5m
- Insulation: 9mm PE
- Insulation R-value: R.61/.49
- Annealed copper tube to AS 1571
- R410A rated
- Insulation colour: white
- Code: PC51458
A short coil suits installations where the indoor and outdoor units are close together, avoiding a long offcut from a full-length coil. Unroll it gently, bend the 5/8" line with a bender where needed, and cut, flare or braze both ends to the unit connections. Seal the insulation at each joint so no bare tube is exposed. Refrigerant pipework must be installed by an appropriately licensed technician.
Measure the route to confirm 5m is enough, including bends at each end, and check that the unit manual calls for 1/4" and 5/8" pipe sizes. If a particular insulation type is specified, compare it with the 9mm PE listed. Connection and commissioning must be done by an ARC-licensed technician.